Boot.img for realme Narzo 10 RMX2040

boot.img for realme narzo 10

Realme Narzo 10

Version

RMX2040_11.A.47

Build

realme UI 1.0

Download

Please back up your data before flashing your device.

# Rooting voids your device warranty.

All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.

Download realme Narzo 10 stock boot image

[table “” not found /]

Pre-requirements

1. Fully charged phone.
2. Make sure your bootloader is unlocked.
3. Your device running on same build as given above.
4. Patience and sometimes brain.
[adinserter name="Block 1"]

Create magisk patched boot image for realme Narzo 10

1.  Download boot.img for realme Narzo 10 file from above link.
2. Download latest magisk manager here.
3. Open magisk and Select Install in magisk as shown in the image below.
magisk boot.img

4. Now, click on Select and Patch a file. It will ask for a zip file.

magisk patched boot.img
5. Navigate to your downloaded stock boot image for realme Narzo 10 file and patch the file.
select boot file
6. Wait for the process to complete.
create magisk patched boot
7. Now, realme Narzo 10 magisk patched boot image is saved in ‘Downloads’ folder. Rename magisk_patched.img output file to boot.img.
8. Enable USB debuging from developer options setting.

Flash magisk boot.img in realme Narzo 10

1. In pc download and Install ADB & fastboot tool from here.
fastboot flash boot boot.img
2. Install USB drivers as administrator form here.
install adb fastboot
3. Connect your phone with the pc  , and copy your boot.img file in fastboot folder.
4. Boot your phone into fastboot mode by one of the following methods.
(a) Type ‘ADB REBOOT BOOTLOADER’ in command prompt.
(b) Press volume down + power button.
(c) Volume up + power simultaneously.
5. Now , open fastboot folder where you copied the boot.img for realme Narzo 10. In Address bar type “CMD” and hit enter . It will open command prompt.
 6. Type”FASTBOOT DEVICES” to check your device is connected or not.

$ fastboot devices

7. If device is connected then type below command in command prompt.

$ fastboot flash boot boot.img

fastboot flash boot.img
8. Its time to reboot your device ,  so type ‘FASTBOOT REBOOT’ command in command prompt.

$ fastboot reboot

fastboot reboot boot.img
Booom, your device is now rooted!
Your device is now rooted
Leave a comment , if you are facing any issue during the rooting process. Our developers will definitely get back to you.

Leave a Comment

Your email address will not be published. Required fields are marked *