Boot.img for oneplus nord

boot.img for oneplus nord

Oneplus Nord

Version

V1.1.10.10.AC01DA

Build Date

6 April 2022

Download

Please back up your data before flashing your device.

# Rooting voids your device warranty.

All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.

Download boot.img for oneplus nord

Oneplus NordRegionDirectMirror
V10.5.10.AC01DAIndiaDownloadDownload
V10.5.10.AC01AAGlobalDownloadDownload
V10.5.11.AC01DAIndiaDownloadDownload
V11.1.8.8.AC01DAIndiaDownloadDownload
V11.1.10.10.AC01DAIndiaDownloadDownload

Pre-requirements

1. Fully charged phone.
2. Make sure your bootloader is unlocked.
3. Your device running on same build as given above.
4. Patience and sometimes brain.
[adinserter name="Block 1"]

Create magisk patched boot.img for oneplus nord

1.  Download boot.img for oneplus nord avicii file from above link.
2. Download latest magisk manager here.
3. Open magisk and Select Install in magisk as shown in the image below.
magisk boot.img

4. Now, click on Select and Patch a file. It will ask for a zip file.

magisk patched boot.img
5. Navigate to your downloaded stock boot image for oneplus nord file and patch the file.
select boot file
6. Wait for the process to complete.
create magisk patched boot
7. Now, magisk patched boot file of oneplus nord is saved in ‘Downloads’ folder. Rename magisk_patched.img output file to boot.img.

Flash magisk boot.img in oneplus nord

1. In pc download and Install ADB & fastboot tool from here.
fastboot flash boot boot.img
2. Install USB drivers as administrator form here.
install adb fastboot
3. Connect your phone with the pc , and copy your boot.img file in fastboot folder.
4. Boot your phone into fastboot mode , by pressing volume down + power button simultaneously.
5. Now , open fastboot folder where you copied the boot.img for oneplus nord avicii. In Address bar type “CMD” and hit enter . It will open command prompt.
 6. Type”FASTBOOT DEVICES” to check your device is connected or not.

$ fastboot devices

fastboot devices
7. If device is connected then type below command in command prompt.

$ fastboot flash boot boot.img

8. Its time to reboot your device ,  so type “FASTBOOT REBOOT” command in command prompt.

$ fastboot reboot

Booom, your device is now rooted!
Your device is now rooted
Leave a comment , if you are facing any issue during the rooting process. Our developers will definitely get back to you.

Leave a Comment

Your email address will not be published. Required fields are marked *