Poco c3
Version
MIUI V12.0.5.0
Build
V12.0.5.0.QCRINXM
Download
Please back up your data before flashing your device.
# Rooting voids your device warranty.
All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.
Download boot.img for poco c3
[table “” not found /]
Pre-requirements
1. Fully charged phone.
2. Make sure your bootloader is unlocked.
3. Your device running on same build as given above.
4. Patience and sometimes brain.
[adinserter name="Block 1"]
Create magisk patched boot image for poco c3
1. Download boot.img for poco c3 angelicain file from above link.
2. Download latest magisk manager here.
3. Open magisk and Select Install in magisk as shown in the image below.
4. Now, click on Select and Patch a file. It will ask for a zip file.
5. Navigate to your downloaded stock boot image for poco c3 file and patch the file.
6. Wait for the process to complete.
7. Now, magisk patched boot file of poco c3 is saved in ‘Downloads’ folder. Rename magisk_patched.img output file to boot.img.
Flash magisk boot.img in poco c3
1. In pc download and Install ADB & fastboot tool from here.
2. Install USB drivers as administrator form here.
3. Connect your phone with the pc , and copy your boot.img file in fastboot folder.
4. Boot your phone into fastboot mode , by pressing volume down + power button simultaneously.
5. Now , open fastboot folder where you copied the boot.img for poco c3. In Address bar type “CMD” and hit enter . It will open command prompt.
6. Type”FASTBOOT DEVICES” to check your device is connected or not.
$ fastboot devices
7. If device is connected then type below command in command prompt.
$ fastboot flash boot boot.img
8. Its time to reboot your device , so type “FASTBOOT REBOOT” command in command prompt.
$ fastboot reboot
Booom, your device is now rooted!
