Boot.img for poco x3 pro (vayu/bhima)

Poco x3 pro

Version

MIUI V13.0.4.0

Build

V13.0.4.0.SJUMIXM

Download

Please back up your data before flashing your device.

Disclaimer !

# Rooting voids your device warranty.

All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.

Table of content

Download latest boot image
Download boot.img
Pre Requirement
Create magisk patched for poco x3 pro
Flash magisk patched in poco x3 pro

Download poco x3 pro stock boot image

Poco X3 Pro (MIUI)	Region	Link	Mirror
V12.0.6.0.RJUMIXM	Global	Download	Download
V13.0.1.0.SJUINXM	India	Download	Download
V13.0.4.0.SJUMIXM	Global	Download	Download

Pre-requirements

1. Fully charged phone.

2. USB Debugging enabled.

3. Make sure your bootloader is unlocked.

4. Boot image build must same as your android build .

5. Patience and sometimes brain.

[adinserter name="Block 1"]

Create magisk patched boot image for poco x3 pro

1. Download boot.img for poco x3 pro vayu file from above link.

2. Download latest magisk manager here.

3. Open magisk and Select Install in magisk as shown in the image below.

4. Now, click on Select and Patch a file. It will ask for a zip file.

5. Navigate to your downloaded stock boot image for poco x3 pro file and patch the file.

6. Wait for the process to complete.

7. Now, poco x3 pro magisk patched boot image is saved in ‘Downloads’ folder. Rename magisk_patched.img output file to boot.img.

Root poco x3 pro without twrp

1. In pc download and Install ADB & fastboot tool from here.

2. Install USB drivers as administrator form here.

3. Connect your phone with the pc , and copy your boot.img file in fastboot folder.

4. Boot your phone into fastboot mode , by pressing volume down + power button simultaneously.

5. Now , open fastboot folder where you copied the boot.img for poco x3 pro . In Address bar type “CMD” and hit enter . It will open command prompt.

6. Type”FASTBOOT DEVICES” to check your device is connected or not.

$ fastboot devices

7. If device is connected then type below command in command prompt.

$ fastboot flash boot boot.img

8. Its time to reboot your device , so type “FASTBOOT REBOOT” command in command prompt.

$ fastboot reboot

Booom, your device is now rooted!