Boot.img for realme 6 RMX2001 - stock boot image realme 6

realme 6

Version

RMX2001_11.B.65

Build

realme UI 2.0

Download

Please back up your data before flashing your device.

Disclaimer !

# Rooting voids your device warranty.

All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.

Table of content

Download latest boot image
Download boot.img
Pre Requirement
Create magisk patched for realme 6
Flash magisk patched in realme 6

Download realme 6 stock boot image

[table “” not found /]

Pre-requirements

1. Fully charged phone.

2. Make sure your bootloader is unlocked.

3. Your device running on same build as given above.

4. Patience and sometimes brain.

[adinserter name="Block 1"]

Create magisk patched boot image for realme 6

1. Download boot.img for realme 6 file from above link.

2. Download latest magisk manager here.

3. Open magisk and Select Install in magisk as shown in the image below.

4. Now, click on Select and Patch a file. It will ask for a zip file.

5. Navigate to your downloaded stock boot image for realme 6 file and patch the file.

6. Wait for the process to complete.

7. Now, realme 8 pro magisk patched boot image is saved in ‘Downloads’ folder. Rename magisk_patched.img output file to boot.img.

8. Enable USB debuging from developer options setting.

Flash magisk boot.img in realme 6

1. In pc download and Install ADB & fastboot tool from here.

2. Install USB drivers as administrator form here.

3. Connect your phone with the pc , and copy your boot.img file in fastboot folder.

4. Boot your phone into fastboot mode by one of the following methods.

(a) Type ‘ADB REBOOT BOOTLOADER’ in command prompt.

(b) Press volume down + power button.

(c) Volume up + power simultaneously.

5. Now , open fastboot folder where you copied the boot.img for realme 6. In Address bar type “CMD” and hit enter . It will open command prompt.

6. Type”FASTBOOT DEVICES” to check your device is connected or not.

$ fastboot devices

7. If device is connected then type below command in command prompt.

$ fastboot flash boot boot.img

8. Its time to reboot your device , so type ‘FASTBOOT REBOOT’ command in command prompt.

$ fastboot reboot

Booom, your device is now rooted!