Boot.img for Redmi K30 pro/Poco F2 pro (imi)

Redmi K30 pro | Poco F2 pro

Version

MIUI V13.0.3.0

Build

V13.0.3.0.SJKMIXM

Download

Please back up your data before flashing your device.

# Rooting voids your device warranty.

All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.

Download redmi k30/poco f2 pro stock boot image

MIUIRegionLinkMirror
V12.0.3.0.QJKMIXMGlobalDownloadDownload
V13.0.3.0.SJKMIXMGlobalDownloadDownload

Pre-requirements

1. Fully charged phone.
2. Make sure your bootloader is unlocked.
3. Your device running on same build as given above.
4. USB debugging enabled.
5.Patience and sometimes brain.
[adinserter name="Block 1"]
[adinserter name="Block 1"]

Create magisk patched boot image for redmi k30 pro/poco f2 pro

1.  Download boot.img for redmi k30 pro/poco f2 pro imi file from above link.
2. Download latest magisk manager here.
3. Open magisk and Select Install in magisk as shown in the image below.
magisk boot.img

4. Now, click on Select and Patch a file. It will ask for a zip file.

magisk patched boot.img
5. Navigate to your downloaded stock boot image for redmi k30 pro file and patch the file.
select boot file
6. Wait for the process to complete.
create magisk patched boot
7. Now, redmi k30 pro magisk patched boot image is saved in ‘Downloads’ folder. Rename magisk_patched.img output file to boot.img.

Flash magisk boot.img in redmi k30 pro/poco f2 pro

1. In pc download and Install ADB & fastboot tool from here.
fastboot flash boot boot.img
2. Install USB drivers as administrator form here.
install adb fastboot
3. Connect your phone with the pc , and copy your boot.img file in fastboot folder.
4. Boot your phone into fastboot mode , by pressing volume down + power button simultaneously.
5. Now , open fastboot folder where you copied the boot.img for redmi k30 pro imi. In Address bar type “CMD” and hit enter . It will open command prompt.
 6. Type”FASTBOOT DEVICES” to check your device is connected or not.

$ fastboot devices

7. If device is connected then type below command in command prompt.

$ fastboot flash boot boot.img

fastboot flash boot.img
8. Its time to reboot your device ,  so type “FASTBOOT REBOOT” command in command prompt.

$ fastboot reboot

fastboot reboot boot.img
Booom, your device is now rooted!
Your device is now rooted
Leave a comment , if you are facing any issue during the rooting process. Our developers will definitely get back to you.

2 thoughts on “Boot.img for Redmi K30 pro/Poco F2 pro (imi)”

  1. I am not sure where you’re getting your information, but good topic. I needs to spend some time learning more or understanding more.
    Thanks for excellent information I was looking for this information for my mission.

Leave a Comment

Your email address will not be published. Required fields are marked *