Redmi Note 3 SE
Version
MIUI V10.2.1.0
Build
V10.2.1.0.MHRMIXM
Download
Please back up your data before flashing your device.
More versions will be added soon.
# Rooting voids your device warranty.
All the Boot images, system files, mentioned on our site belong to the respective developers. We are not responsible if anything goes wrong with your device. Perform it at your own risk.
Stock Boot.img for Redmi note 3 se
Pre-requirements
1. Fully charged phone.
2. Make sure your bootloader is unlocked.
3. Your device running on same build as given above.
4. Patience and sometimes brain.
Create magisk patched boot.img for Redmi kate
1. Download boot.img for redmi note 3 se file from above link.
2. Download latest magisk manager here.
3. Open Magisk and Select Install in Magisk as shown in the image below.
4. Now , click on ‘Select and Patch a file’. It will ask for a zip file.
5. Navigate to your downloaded Boot.img for redmi note 3 se file and patch the file.
6. Wait for the process to complete.
7. Now , patched boot file of redmi note 3 se is saved in ‘Downloads’ folder . Rename magisk_patched.img output file to boot.img.
Flash magisk boot.img in Redmi Note 3 Se
1. In pc download and Install ADB & fastboot tool from here.
2. Install USB drivers as administrator form here.
3. Connect your phone with the pc , and copy your boot.img file in fastboot folder.
4. Boot your phone into fastboot mode , by pressing volume down + power button simultaneously.
5. Now , open fastboot folder where you copied the boot.img for redmi note 3 se. In Address bar type “CMD” and hit enter . It will open command prompt.
6. Type”FASTBOOT DEVICES” to check your device is connected or not.
7. If device is connected then type “FASTBOOT FLASH BOOT boot.img” in command prompt.
8. Its time to reboot your device , so type “FASTBOOT REBOOT” command in command prompt
Congratulation, Your device is rooted.
